Allis Chalmers B-series Tractor Service Repair Manual

Allis Chalmers B-series Tractor Service Repair Manual

Online pdf Allis Chalmers B-series Tractor Service Repair Manual

The battery should be kept clean and dry at all times. Keep battery snugly fastened in place and check battery cables for tight connections. Vent caps should be kept tight and vent holes in vent caps must be kept open at all times to permit gases formed in battery to escape. Full maintenance instructions are provided on separate instruction card for battery. If tractor is not used for an extended period during winter, remove battery and store in a fully charged condition, in a cool place.

BEVEL GEAR HOUSING
The bevel gear housing has a capacity of 1 pint of SAE 90 oil and is filled at the factory. It will not normally require replenishment, but occasionally check drain plug for tightness and oil seals for leakage. Keep oil up to level of filler plug. (See Fig. 5).

TRANSMISSION
The transmission has a capacity of 1-112 qts. of SAE 90 oil and is filled at the factory. It will not normally require replenishment, but occasionally check drain plug for tightness and axle tube oil seals for leakage. Maintain oil level at lower edge of filler plug hole. Remove vent plug from top of transmission and allow oil to settle to normal level before checking. (See Fig. 4).

Share